Jump to content

how do you make these sounds?


Recommended Posts

Well, I've been wondering too. The first sound is a sawtooth waveform with the filter moving up and down, and some other fx maybe, (delay of course) The other I'm not sure, but it sounds like some patch you coud get from a synth. It's a cool sound and I wish I knew how to recreate it. Sorry I can't be as much help....those are my guesses.

Link to comment
Share on other sites

i just worked it out!

 

 

i used vst plugins,

 

first make 128 F#, octave 2 notes in

 

refx junoX2, which is set to

osc 1=PWMx2

osc 2=Saw

sub=pulse2

fat=65%><

filter f=396hz,q=19%, type=HP 12db

envelope a=5ms,d=0.2s,s=4%,r=5ms,vol=73%,pwm=0% (very important), filter=19%

lfo f=2.4hz,pwm=0%

 

next in chain is classic flanger (classic plugs from http://www.kjaerhusaudio.com/

 

delay time=4mx,

rate=0.05,depth=74%,feedback modulating between 0 and 56% (you'll see what i mean)

output, effect=full on

 

classic chorus

 

delay time range=40ms,fine=0.915

modulation rate=0.288, spread on, depth=13%, mix 1:1

 

classic auto filter

 

filter type=BP (band pass)

filter frequency=186.8,resonance =7

 

mix=64.36

 

envelope follower attack=0,release=1.514,depth=24

 

lfo sync on, r.h off, spr. on,depth=80, t.sig (time signature) 1/1

 

retro delay (from http://www.e-phonic.com/

 

active button under bpm time active,

first and second bpm time knobs set to 2 and 4, both dotted

feedback=0.7, 1pass, not negative (neg button not clicked)

 

delay time lfo rate=32, depth=a very little

 

cutoff facing hard left, resonance at 11'oclock

filter type high pass, filter on

 

filter cutoff lfo rate=32, depth=0.55

mode +L -R

 

Dry/wet just past half way mark (1'oclock)

 

volume on full,

reverb,distortion off

both delays on sine wave

 

 

all effects processed in order above!

 

ok, thats the first sound! its not exact but it sounds much better than the original :-)

 

have fun!

Link to comment
Share on other sites

ok, thats the first sound! its not exact but it sounds much better than the original :-)

 

have fun!

214607[/snapback]

could u please post an audio of that one because i didn't think it sounded much like the sound in life one mars when i adjusted it with your settings. maybe i did something wrong...

Link to comment
Share on other sites

could u please post an audio of that one because i didn't think it sounded much like the sound in life one mars when i adjusted it with your settings. maybe i did something wrong...

214898[/snapback]

 

http://www.psy-trance.com/mars.mp3

 

ok, it sounds roughly like it; what i've done sounds a bit fuller and doesn't have that 'digital' kinda sound.

 

maybe someone can get closer to the sound?

 

lets ask AP how they made it!

Link to comment
Share on other sites

http://www.psy-trance.com/mars.mp3

 

ok, it sounds roughly like it; what i've done sounds a bit fuller and doesn't have that 'digital' kinda sound.

 

maybe someone can get closer to the sound?

 

lets ask AP how they made it!

214913[/snapback]

ok, sounded cool, but too hollow... i bet they did that sound on their sh-101. i'll try to do a clone with my powercore 01 and post it if i can come up with something close to it.

Link to comment
Share on other sites

ok, sounded cool, but too hollow... i bet they did that sound on their sh-101. i'll try to do a clone with my powercore 01 and post it if i can come up with something close to it.

214938[/snapback]

i just did one with the poco 01 but i have no place to upload the sample... where do u guys usually upload samples of your work?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...