Jump to content

problem with a cdj500


Guest

Recommended Posts

hi,

i've got a little pb with my cdj500 : when i switch it on tonight the auto-cue function switch on too and now i don't know how switch this function off !

i didn't know this function before and it sux !

help from anybody will be welcome !

thx

Link to comment
Share on other sites

I find that if you tap the flux capacitor with a 5/8 socket set right where the widget comes into the pump, that will do the trick...

 

alternatively, tighten the whatzit to 16 ft/lbs using a torque wrench and be sure that the thingamajiggy is all lubed up-- nothing worse than a dry thingamajiggy to really screw over those old CDJ500's...

 

(can you tell I have no idea what a cdj500 is?)

Link to comment
Share on other sites

try pressing the cue button, the one you normally use to cue the track...for a few seconds. Maybe try that while turning it on or even the play button. My friend had this same problem with his 500 and we figured it out messing around with the buttons like that. Sorry i can't tell you exaclty what we did because of course each time it happened we were...somewhat loaded...and have been many times since so hard to remember some things. There may even be some small button on the back, one that's hard to see unless you are really looking at it. Anyway, try that...you'll get it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...