Guest faxanadu Posted January 13, 2003 Share Posted January 13, 2003 Hi Is this a good studio amp? anyone using it and with what monitors? thanks kits Quote Link to comment Share on other sites More sharing options...
Guest faxanadu Posted January 13, 2003 Share Posted January 13, 2003 Input jacks Pin jack x 1/ch, Phone jack x 1/ch Output connectors 4P push terminals Functions POWER switch, OUTPUT LEVEL controls, Level meters, CLIP indicators Rated output 50 W + 50 W (1% THD, 8 Ohm) Input sensitivity -10 dB (245 mV), (1 kHz, 50W/8 Ohm, vol. max.) Voltage gain 38.2 dB (1 kHz) Frequency response 20 Hz - 20 kHz (0 +/- 0.5 dB) Power bandwidth 10 Hz - 40 kHz (0.2 % THD, 25 W/8 Ohm) Total harmonic distortion 0.02 % (1 kHz, 25 W/8 Ohm) 0.2%(20 Hz - 20 kHz, 25 W/8 Ohm) Intermodulation distortion 0.2 % (70 Hz : 7kHz = 4 : 1, 25 W/8 Ohm) Channel separation 70 dB (1 kHz),60 dB (20 Hz - 10 kHz) Signal to noise ratio -107 dB (input shorted, IHF A) Residual noise -79 dB (vol. min., IHF A) Slew rate 10 V/microsec. (full swing, 8 Ohm) Damping factor Grater 70 (1 kHz/8 Ohm), grater than 60 (20 Hz - 20 kHz, 8 Ohm) Input impedance 8 k Ohm Power requirement U.S. and Canadian Models: AC 120V / 60 Hz General Model: AC 230 V / 50 Hz Power consumption U.S. and Canadian Models: 160 W General and UK Models: 120 W Dimensions (W x H x D) 220 x 97.5 x 297.3 mm (8-11/16" x 3-13/16" x 11-11/16") Weight 4.6 kg (10 lbs. 2 oz) These r the specs, i'm looking to but it for about 200-250 bucks, is it worth it???? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.